PTC1000
PTP Clock Converter
- Support IEEE 1588v2, the synchronization accuracy reaches ±100ns.
- Support ITU-T.G.8261/G.8262 SyncE, the synchronization accuracy can reach ±50ns with SyncE enabled.
- Support 1 100Base-FX SC/ST/FC or 1 10/100Base-TX RJ45 IEEE1588 input.
- Support PPS output, IRIG-B TTL outputs, and IRIG-B AM modulation.
- Supports IRIG-B000, B001, B002, B003, B004, B005, B006, B007, B120, B121, B122, B123, B124, B125, B126, B127.
- Complies with IEC 61850-3 and IEEE1613.
- CE, UL508 certificates.
Description
PTC1000 Clock Converter realizes the conversion from PTP to IRIG-B and PPS (Pulse Per Second). This allows the industrial devices that are equipped with IRIG-B clock interfaces and PPS interface to conveniently access PTP network. This provides economic solution for evolving legacy network into future-proofing PTP network and achieve high precision synchronization required in industrial control system.
Key Features
- Support IEEE 1588v2, the synchronization accuracy reaches ±100ns.
- Support ITU-T.G.8261/G.8262 SyncE, the synchronization accuracy can reach ±50ns with SyncE enabled.
- Support 1 100Base-FX SC/ST/FC or 1 10/100Base-TX RJ45 IEEE1588 input.
- Support PPS output, IRIG-B TTL outputs, and IRIG-B AM modulation.
- Supports IRIG-B000, B001, B002, B003, B004, B005, B006, B007, B120, B121, B122, B123, B124, B125, B126, B127.
- Complies with IEC 61850-3 and IEEE1613.
- CE, UL508 certificates.
Specifications
| Software Functions | |
| Management & Maintenance | Supports Console, Telnet, and Web management methods. Supports SNMPv1/v2c and can managed by Kyvision. Supports software update over FTP. Supports the power failure alarm, power alarm |
| Clock Management | Supports PTPv2 (IEEE1588-2008). Supports Power profile (C37.238). Supports Telecom profile (in special version). Supports synchronous Ethernet (ITU-T.G.8261/G.8262). |
| Product Specifications | |
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX and 100Base-FX) IEEE 1588-2008(PTPv2) ITU-T.G.8261/G.8262 (synchronous Ethernet) |
| Interface | PTP port: 100Base-FX, single/multi mode, SC/ST/FC connector 10/100Base-T(X), RJ45 port Console port: RS232,RJ45 Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2A Max, 60 W Max Clock Signal: PPS: TTL level +5V, 50Ω, Rising edge based, pulse width 20ms-200ms, stepped by 20ms (configurable in software), BNC connector IRIG-B DC: TTL level +5V, 600Ω, Rising edge based, BNC connector or 2-pin 5.08mm-spacing plug-in terminal block RS422, 2-pin 5.08mm-spacing plug-in terminal block IRIG-B AM: Vp-p, 3V-10V (configurable in software, default Vp-p: 4.5V), 600Ω, Modulation Ratio 3:1, 4:1, 5:1, 6:1 (optional, default modulation ratio is 3:1), BNC connector or 2-pin 5.08mm-spacing plug-in terminal block |
| LED | LED on front panel Running LED: Run Alarm LED: Alarm Power LED: PWR1, PWR2 Port LED: Link/ACT, Speed PTP Sync LED: Sync |
| Power Requirements | Power input: 24VDC(18-36VDC) 110VDC(77-154VDC) 100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC) Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block Power consumption<4w Overload protection: Support Reverse connection protection: Support Redundancy protection: Support |
| Physical Characteristics | Housing: Metal Cooling: Natural cooling, fanless Protection Class: IP40 Dimensions(WxHxD): 62.4×139×119.5 mm (2.45×5.47×4.70 in.) Weight: 0.75kg (1.653 pound) Mounting: Vertical or Horizontal Din-Rail |
| Environmental Limits | Operating temperature: -40°C to +85°C (-40°F-185°F) Storage temperature: -40°C to +85°C (-40°F-185°F) Ambient Relative Humidity: 5% to 95% (non-condensing) |
| Quality Assurance | MTBF: 332,600 hrs Warranty: 5 years |
| Approvals | CE: Models with power supply of L3: 24VDC UL508: Models with power supply of L3: 24VDC |
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz-2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz-150kHz); 10V(150kHz-80MHz) IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s) Machinery: IEC60068-2-6 (vibration), IEC60068-2-27 (shock), IEC60068-2-32 (free fall) |
Ordering
| PTC1000-Ports-Connector-XX-PS | |
| Ports | |
| 1S | 1x100Base-FX, single-mode fiber port |
| 1M | 1x100Base-FX, multi-mode fiber port |
| 1T | 1×10/100Base-T(X) RJ45 port |
| Connector | 100M fiber port specifications |
| SC05 | SC connector, multi-mode, 1310nm, 5km |
| ST05 | ST connector, multi-mode, 1310nm, 5km |
| FC05 | FC connector, multi-mode, 1310nm, 5km |
| SC40 | SC connector, single-mode, 1310nm, 40km |
| ST40 | ST connector, single-mode, 1310nm, 40km |
| FC40 | FC connector, single-mode, 1310nm, 40km |
| SC60 | SC connector, single-mode, 1310nm, 60km |
| SC80 | SC connector, single-mode, 1550nm, 80km |
| N/A | No 100M fiber port |
| XX | Connector of the second IRIG-B port |
| None | The second channel of IRIG-B out is 2-pin 5.08 mm-spacing plug-in terminal block |
| 1 | The second channel of IRIG-B out is BNC connector |
| PS | |
| HV | 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC),single power input |
| H2-H2 | 110VDC(77-154VDC), redundant power inputs |
| L2-L2 | 24-48VDC(18-72VDC), redundant power inputs |
| Accessories | |
| DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |
