10G Port Entry-level Full Gigabit Unmanaged DIN-Rail Switch

  • 2 Gigabit SFP slots, 8 10/100/1000Base-T(X) ports
  • Setting jumbo frame transmission function (up to 9.6KB) by DIP-Switch
  • Both standard and wide operating temperature models are available
  • IP30 protection class
  • UL508 (Pending), Class I Div 2 (Pending), ATEX Zone 2(Pending), IECEx (Pending), CE, FCC


Opal10G series, Kyland produced 10-port unmanaged switches, are characterized by its full Gigabit interface, compact size, economical and plug-and-play design, generally used to connect the high bandwidth Ethernet in factory automation, petrochemical, ITS, and other applications. Opal10G support 2 Gigabit SFP ports and up to 8 10/100/1000Base-TX RJ45 ports, along with metal housing with IP30 protection class, thus ensuring fast and reliable data transmission in harsh industrial environments. The two DIP-switches located on the top of the device are used to enable/disable Broadcast Storm Protection (BSP) function and Jumbo frame transmission function, respectively. Opal10G provide both standard (-10°C to 60°C) and wide (-40°C to 75°C) operating temperature range models to meet different applications.


Standard IEEE 802.3i (10Base-T)
IEEE 802.3u (100Base-TX )
IEEE 802.3ab(1000Base-T)
IEEE 802.3z (1000Base-X)
Switch Properties MAC Table: 8K
Packet Buffer: 4Mbit
Packet Forwarding Rate: 14.9Mpps
Switching Delay:<5μs Jumbo Frame Size: 9.6KB
Interface Gigabit Port:
1000Base-X, SFP slot
10/100/1000Base-T(X), RJ45 port
LED LEDs on Front Panel
Power LED: PWR1, PWR2
Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT (Fiber port)
DIP-Switch Enable/Disable broadcast storm protection
Enable/Disable Jumbo frame transmission function (up to 9.6KB)
Power Requirements Power Input: 12-48VDC/18-30VAC
Power Terminal:
4-pin 5.08mm-spacing plug-in terminal block
Power Consumption:<12w Overload Protection: Support Reverse Protection: Support Redundancy Protection: Support
Physical Characteristics Housing: Metal
Cooling: Natural convection, fanless
Protection Class: IP30
Dimension: 54mm×134mm×106mm (W×H×D)
Weight: 0.5Kg
Mounting: DIN-Rail or Panel Mounting
Environmental Limits Operating Temperature:
-10 to +60°C (Opal10G-E)
-40°C to +75°C
Storage Temperature: -40°C to +85°C
Ambient Relative Humidity: 5–95% (non-condensing)
Quality Assurance MTBF: 2,497,305 hrs
Warranty: 5 years
Approvals UL508, Class I Div 2, ATEX Zone 2, IECEx, CE, FCC
Industry Standard EMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A
IEC61000-4-2(ESD): ±6kV (contact), ±8kV (air)
IEC61000-4-3(RS): 10V/m (80MHz–2GHz)
IEC61000-4-4(EFT): Power Port: ±2kV; Data Port: ±1kV
IEC61000-4-5(Surge): Power Port: ±1kV/DM, ±2kV/CM; Data Port: ±1kV
IEC61000-4-6(CS): 10V (150kHz–80MHz)
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)


X Operating temperature range
E -10 to +60°C operating temperature
None -40 to+75°C operating temperature
2GX8GE 2 X 1000Base-X SFP slots, 8 X 10/100/1000Base-T(X) RJ45 ports
8GE 8X10/100/1000Base-T(X) RJ45 ports
LV-LV 12-48VDC/18-30VAC, redundant power inputs
Gigabit SFP module Please refer to the Gigabit SFP module ordering list
DT-BGAZ-11 Panel for Panel mounting
DT-FCZ-RJ45-01 Dustproof cover for RJ45 port