MOXA Categories

EDS-205/EDS-208 Series
SKU: N/A5 and 8-port entry-level unmanaged Ethernet switches
- 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors)
- IEEE802.3/802.3u/802.3x support
- Broadcast storm protection
- DIN-rail mounting ability
- -10 to 60°C operating temperature range

EDS-205A/EDS-208A Series
SKU: N/A5 and 8-port unmanaged Ethernet switches
- 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector)
- Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
- IP30 aluminum housing
- Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), Transportation (NEMA TS2/ EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/ NK)
- -40 to 75°C operating temperature range (T models)

EDS-210A Series
SKU: N/A8+2G/9+1G-port Gigabit unmanaged Ethernet switches
- Up to 2 Gigabit uplinks for high bandwidth data aggregation
- Multiple fiber ports with up to 4 100BaseSFP port combinations for maximum flexibility
- IP30 metal housing
- Redundant dual power input (12/24/48 VDC)
- -40 to 75°C operating temperature range (T models)

EDS-305/EDS-308 Series
SKU: N/A5 and 8-port unmanaged Ethernet switches
- Relay output warning for power failure and port break alarm
- Broadcast storm protection
- -40 to 75°C operating temperature range (T models)

EDS-510A Series
SKU: N/A7+3G-port Gigabit managed Ethernet switches
-
2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solution
-
Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
-
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
-
Easy network management by web browser, CLI, Telnet/ serial console, Windows utility, and ABC-01

ICF-1150 Series
SKU: N/AIndustrial RS-232/422/485 to fiber converters
- 3-way communication: RS-232, fiber, and RS-422/485
- Rotary switch to change the pull high/low resistor value
- Extend RS-232/422/485 transmission up to:
• 40 km with single-mode
• 5 km with multi-mode - 3-way isolation protection (for “I” models only)
- -40 to 85°C wide temperature range models available
- C1D2, ATEX, and IECEx certified for harsh industrial environments

NPort 5110/NPort 5130/NPort 5150 Series
SKU: N/A1-port RS-232/422/485 serial device servers
- Small size for easy installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operation modes
- Easy-to-use Windows utility for configuring multiple device servers
- SNMP MIB-II for network management
- Configure by Telnet, web browser, or Windows utility
- Adjustable pull high/low resistor for RS-485 ports

NPort 5110A/NPort 5130A/NPort 5150A Series
SKU: N/A1-port RS-232/422/485 serial device servers
- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts

NPort IA5150/NPort IA5250 Series
SKU: N/A1 and 2-port serial device servers for industrial automation
- Socket modes: TCP server/TCP client/UDP
- Patented ADDC® (automatic data direction control) for 2-wire and 4-wire RS-485
- Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors)
- Redundant DC power inputs
- Warning by relay output and e-mail
- 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC connector)
- IP30-rated housing

NPort IA5150A/NPort IA5250A/NPort IA5450A Series
SKU: N/A1, 2, and 4-port serial device servers for industrial automation
- Enhanced surge protection for LAN/serial/power
- 2 kV isolation for serial signals (isolation models)
- Screw-type terminal blocks for secure power/serial connections
- C1D2, ATEX, and IECEx certified for harsh industrial environments
- Cascading Ethernet ports for easy wiring
- Redundant DC power inputs
- Warning by relay output and email
- -40 to 75°C operating temperature range (T models)

NPort W2150A/NPort W2250A
SKU: N/A1 and 2-port serial-to-WiFi (802.11a/b/g/n) device servers with wireless client
- Link any serial or Ethernet device to an IEEE 802.11a/b/g/n network
- 921.6 kbps baudrate for RS-232/422/485 transmissions
- Web-based configuration using built-in Ethernet or WLAN
- Enhanced surge protection for serial, LAN, and power
- Remote configuration with HTTPS, SSH
- Secure data access with WEP, WPA, WPA2
- Fast automatic wireless fast roaming
- Offline port buffering and serial data log
- Dual power inputs (1 screw-type power jack, 1 terminal block)
- Supports wireless clients

TCC-100/TCC-100I
SKU: N/AIndustrial RS-232 to RS-422/485 converters with optional 2 kV isolation
- RS-232 to RS-422 conversion with RTS/CTS support
- RS-232 to 2-wire or 4-wire RS-485 conversion
- 2 kV isolation protection (TCC-100I)
- Wall- and DIN-rail mounting
- Plug-in terminal block for easy RS-422/485 wiring
- LED indicators for power, Tx, Rx
- Wide temperature range model available (-40 to 85°C)

TCC-120/TCC-120I
SKU: N/AIndustrial RS-422/485 converters/repeaters with optional 2 kV isolation
- Boost serial signal to extend transmission distance
- Wall- or DIN-rail mounting
- Terminal block for easy wiring
- Power input from terminal block
- DIP switch setting for built-in terminator (120 ohm)
- Boost RS-422 or RS-485 signal, or convert RS-422 to RS-485
- 2 kV isolation protection (TCC-120I)

TCF-142 Series
SKU: N/ARS-232/422/485 to fiber converters
- “Ring” and “Point- to-Point” transmission
- Extends RS-232/422/485 transmission up to:
• 40 km with single-mode—TCF-142-S
• 5 km with multi-mode—TCF-142-M - Decreases signal interference
- Protects against electrical interference and chemical corrosion
- Supports baudrates up to 921.6 kbps
- Wide temperature range models available (-40 to 75°C)

TCF-90 Series
SKU: N/APort-powered RS-232 to fiber converters
- Use either external power or power over serial
- Extends RS-232 transmission up to:
• 40 km with single-mode—TCF-90-S
• 5 km with multi-mode—TCF-90-M - Reduces signal interference
- Protects against electrical interference or chemical corrosion
- Compact size

EDS-205/EDS-208 Series
5 and 8-port entry-level unmanaged Ethernet switches
- 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi-mode, SC/ST connectors)
- IEEE802.3/802.3u/802.3x support
- Broadcast storm protection
- DIN-rail mounting ability
- -10 to 60°C operating temperature range
Out of stock

EDS-205A/EDS-208A Series
5 and 8-port unmanaged Ethernet switches
- 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector)
- Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs
- IP30 aluminum housing
- Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), Transportation (NEMA TS2/ EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/ NK)
- -40 to 75°C operating temperature range (T models)
Out of stock

EDS-210A Series
8+2G/9+1G-port Gigabit unmanaged Ethernet switches
- Up to 2 Gigabit uplinks for high bandwidth data aggregation
- Multiple fiber ports with up to 4 100BaseSFP port combinations for maximum flexibility
- IP30 metal housing
- Redundant dual power input (12/24/48 VDC)
- -40 to 75°C operating temperature range (T models)
Out of stock

EDS-305/EDS-308 Series
5 and 8-port unmanaged Ethernet switches
- Relay output warning for power failure and port break alarm
- Broadcast storm protection
- -40 to 75°C operating temperature range (T models)
Out of stock

EDS-510A Series
7+3G-port Gigabit managed Ethernet switches
-
2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solution
-
Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
-
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
-
Easy network management by web browser, CLI, Telnet/ serial console, Windows utility, and ABC-01
Out of stock

ICF-1150 Series
Industrial RS-232/422/485 to fiber converters
- 3-way communication: RS-232, fiber, and RS-422/485
- Rotary switch to change the pull high/low resistor value
- Extend RS-232/422/485 transmission up to:
• 40 km with single-mode
• 5 km with multi-mode - 3-way isolation protection (for “I” models only)
- -40 to 85°C wide temperature range models available
- C1D2, ATEX, and IECEx certified for harsh industrial environments
Out of stock

NPort 5110/NPort 5130/NPort 5150 Series
1-port RS-232/422/485 serial device servers
- Small size for easy installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operation modes
- Easy-to-use Windows utility for configuring multiple device servers
- SNMP MIB-II for network management
- Configure by Telnet, web browser, or Windows utility
- Adjustable pull high/low resistor for RS-485 ports
Out of stock

NPort 5110A/NPort 5130A/NPort 5150A Series
1-port RS-232/422/485 serial device servers
- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts
Out of stock

NPort IA5150/NPort IA5250 Series
1 and 2-port serial device servers for industrial automation
- Socket modes: TCP server/TCP client/UDP
- Patented ADDC® (automatic data direction control) for 2-wire and 4-wire RS-485
- Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors)
- Redundant DC power inputs
- Warning by relay output and e-mail
- 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC connector)
- IP30-rated housing
Out of stock

NPort IA5150A/NPort IA5250A/NPort IA5450A Series
1, 2, and 4-port serial device servers for industrial automation
- Enhanced surge protection for LAN/serial/power
- 2 kV isolation for serial signals (isolation models)
- Screw-type terminal blocks for secure power/serial connections
- C1D2, ATEX, and IECEx certified for harsh industrial environments
- Cascading Ethernet ports for easy wiring
- Redundant DC power inputs
- Warning by relay output and email
- -40 to 75°C operating temperature range (T models)
Out of stock

NPort W2150A/NPort W2250A
1 and 2-port serial-to-WiFi (802.11a/b/g/n) device servers with wireless client
- Link any serial or Ethernet device to an IEEE 802.11a/b/g/n network
- 921.6 kbps baudrate for RS-232/422/485 transmissions
- Web-based configuration using built-in Ethernet or WLAN
- Enhanced surge protection for serial, LAN, and power
- Remote configuration with HTTPS, SSH
- Secure data access with WEP, WPA, WPA2
- Fast automatic wireless fast roaming
- Offline port buffering and serial data log
- Dual power inputs (1 screw-type power jack, 1 terminal block)
- Supports wireless clients
Out of stock

TCC-100/TCC-100I
Industrial RS-232 to RS-422/485 converters with optional 2 kV isolation
- RS-232 to RS-422 conversion with RTS/CTS support
- RS-232 to 2-wire or 4-wire RS-485 conversion
- 2 kV isolation protection (TCC-100I)
- Wall- and DIN-rail mounting
- Plug-in terminal block for easy RS-422/485 wiring
- LED indicators for power, Tx, Rx
- Wide temperature range model available (-40 to 85°C)
Out of stock

TCC-120/TCC-120I
Industrial RS-422/485 converters/repeaters with optional 2 kV isolation
- Boost serial signal to extend transmission distance
- Wall- or DIN-rail mounting
- Terminal block for easy wiring
- Power input from terminal block
- DIP switch setting for built-in terminator (120 ohm)
- Boost RS-422 or RS-485 signal, or convert RS-422 to RS-485
- 2 kV isolation protection (TCC-120I)
Out of stock

TCF-142 Series
RS-232/422/485 to fiber converters
- “Ring” and “Point- to-Point” transmission
- Extends RS-232/422/485 transmission up to:
• 40 km with single-mode—TCF-142-S
• 5 km with multi-mode—TCF-142-M - Decreases signal interference
- Protects against electrical interference and chemical corrosion
- Supports baudrates up to 921.6 kbps
- Wide temperature range models available (-40 to 75°C)
Out of stock

TCF-90 Series
Port-powered RS-232 to fiber converters
- Use either external power or power over serial
- Extends RS-232 transmission up to:
• 40 km with single-mode—TCF-90-S
• 5 km with multi-mode—TCF-90-M - Reduces signal interference
- Protects against electrical interference or chemical corrosion
- Compact size
Out of stock