KOM300M

3 Port Managed Din-Rail Copper to Fiber Media Converters

  • Green Ethernet solution with ultra low power consumption design, its full load power consumption is as low as 2.7 watts
  • 1 100Base-FX port and 2 10/100Base-T(X) RJ45 ports
  • Supports remote monitoring of device status
  • Redundant power inputs with wide voltage range
  • IP40 protection class
  • CE, FCC certificates

Description

The KOM300M is a ultra low power consumption Green industrial media convertor, its full load power consumption is as low as 2.7 watts. The KOM300M supports 1 100Base-FX fiber port and 2 10/100Base-T(X) copper ports. The KOM300M provides 9-36VDC or 18-72VDC redundant power inputs, supports DIN-Rail mounting or Panel mounting, and IP40 protection class. It supports Telnet, WEB, Kyvision management.

Specifications

Software Functions Management and maintenance Supports Telnet and Web management methods
Supports SNMPv1/v2c/V3 and Kyvision centralized management
Supports FTP/TFTP software upgrade
Supports port alarm
Supports LLDP
Product Specifications
Standard IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
Switch Properties MAC Table: 2K
Packet Buffer: 1Mbit
Packet Forwarding Rate: 0.8Mpps
Switching Delay:<5μs
Interface Fast Ethernet Ports:
100Base-FX, SM/MM port, FC/SC/ST connector
10/100Base-T(X) RJ45 port
LED Indicators in the front panel
Running LED: Run
Power LED: PWR1, PWR2
Interface LED: Link/ACT, Speed (RJ45 Ports); Link/ACT(Fiber Ports)
Power Requirements Power Input:
24-48VDC(18-72VDC)
12-24VDC(9-36VDC)
Power Terminal:
5-pin 5.08mm-spacing plug-in terminal block
Power Consumption<2.7w Overload Protection: Support ReverseConnection Protection: Support Redundancy Protection: Support
Physical Characteristics Housing: Metal
Heat Dissipation Mode: Natural cooling, without fans
Protection Class: IP40
Dimensions:
30mm×115mm×91.5mm (W×H×D)
Weight: 0.46kg
Mounting: DIN-Rail or Panel mounting
Environmental Limits Operating Temperature: -40°C to +85°C
Storage Temperature: -40°C to +85°C
Ambient Relative Humidity: 5 – 95% (non-condensing)
Quality Assurance MTBF: 457,840 hrs
Warranty: 5 years
Approvals CE(EMC), FCC: Models with L2:24-48VDC.
Industry Standard EMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A
EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV
IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz)
Mechanical standards:
IEC60068-2-6 (Vibration),
IEC60068-2-27 (Shock),
IEC60068-2-32 (Free Fall)

Ordering

KOM300M-Ports-Connector-PS1-PS2
Ports
1S2T 1 × 100Base-FX single mode port, 2 × 10/100Base-T(X) RJ45 ports
1M2T 1 × 100Base-FX multi mode port, 2 × 10/100Base-T(X) RJ45 ports
Connector 100M fiber port specifications
SC05 SC connector, multi-mode, 1310nm, 5km
ST05 ST connector, multi-mode, 1310nm, 5km
FC05 FC connector, multi-mode, 1310nm, 5km
SC40 SC connector, single-mode, 1310nm, 40km
ST40 ST connector, single-mode, 1310nm, 40km
FC40 FC connector, single-mode, 1310nm, 40km
SC60 SC connector, single-mode, 1310nm, 60km
SC80 SC connector, single-mode, 1550nm, 80km
PS
L2-L2 24-48VDC(18-72VDC), redundant power inputs
L5-L5 12-24VDC( 9-36VDC), redundant power inputs
Accessories
DT-BGAZ-01 Panel for panel mounting
DT-FCZ-RJ45-01 Dustproof cover for RJ45 port